This Nickel-Free Leather BDSM Collar is made using a variety of metals and is available in many different leathers. The bondage collar is 1” wide and has a double riveted strap in front holding a small stainless steel bondage ring. The bondage ring is welded together and cannot be undone. The dee ring is pointed and is 3/4” wide and has a 1” internal diameter O-ring placed through it.

The leather strap going across the BDSM slave collar is held on with rivets of your choice. I have available silver colour or solid black. The silver rivets are BRASS BOTTOMS (brass stems) with nickel caps on top to keep the hardware on the collar all silver. NO NICKEL TOUCHES the skin! Only the solid brass rivets stems touch from underneath and cannot be seen. The caps sit on top of the leather and will not touch. This keeps the entire bondage collar in silver metal hardware. There is no stainless steel jiffy rivets, so I use this very safe method and have been doing so for at least 10 years now. If you dont want any nickel whatsoever on the BDSM collar, then you may choose the ALL BLACK poly-coated steel rivets. These rivets are made using a base metal alloy and are dipped in a black poly-coated material. You may choose which rivets you would like in the drop down box.

In the back of the leather bondage collar is your choice of buckle. You may have a stainless steel standard non-locking buckle with a stainless steel keeper next to it to hold the excess leather. Or you may have a black lockable buckle and your choice of nickel-free padlock. There are no stainless steel lockable buckles so I use the black polycoated steel buckles to make these BDSM slave collars lockable. There are plenty of nickel free padlocks to choose from, but if you do not want to choose, I will choose for you. (Lockable w/Padlock choice only) You can view all of the Nickel Free Padlocks in the Metal Accessories menu.

Standard buckle collars will have stainless steel grommets in the fastening holes for silver rivets and black grommets, for black rivets. Lockable w/Padlock collars will have an oval punched hole so that the leather can stretch and pass over the special-shaped locking tongue of the buckle. There are no grommets for lockable collars.

Please place down your EXACT neck circumference on your order so that I may custom fit for you and place your size in the middle holes. You may read all about sizing in my Sizes Page

This leather sub collar is available in a large amount of different leathers and colours. The main photo is showing the Black Latigo Leather. This is a firm waxy hide which has a lot of flexibility and suppleness. It is 10oz thick (4mm) This leather is typically used for horse riding tack and belts and is extremely strong. All edges are bevelled and rounded to prevent chafing. Please read my FULL DESCRIPTION on all leathers available in my Leather Information Page.